Currency : £
Welcome Log in
No products
£ 0.00 Shipping £ 0.00 Tax £ 0.00 Total
Prices are tax included
Cart Check out
All manufacturers Airfix Bachmann Carrera Cavalex Models CGW Nameplates Corgi Dapol DCC Concepts EFE Rail Evergreen Styrene Strips, Shapes and Sheet Gaugemaster Graham Farish Hattons Heljan HMRS Hornby Hobbies Limited Jackson Evans Kadee Couplings Lionheart Trains Merkur Metcalfe NOCH North Coast Engineering (NCE) Parkside Dundas PECO Proses Romford Wheels Scalextric Superquick Train Tech Walthers Wills Kits & Material Packs
All suppliers Professional Layout Services
PECO complement their extensive track ranges in all gauges with an assortment of electric accessories including turnout (point) motors, switches etc.
items: 10 20 50
Sort by -- Price: lowest first Price: highest first Product Name: A to Z Product Name: Z to A In-stock first
Show: 10 20 50 products by page
Select to compare
PECO PL-41 Rail Cleaner. Abrasive rubber block.
Pack of 20 self adhesive cable clips similar to PL-37 PLEASE NOTE you are not purchasing PECO PL-37.
The most reliable, discrete and simple method is to clip one of these directly to the underside of a Peco turnout. Requires a rectangular hole 40mm x 24mm.
Designed for use with PL-9 mounting plate. Use this if you do not wish to cut a large hole in your baseboard. Drill a hole, 9.5mm (3/8in) through the baseboard beneath the centre of the tie bar.
Specially wound coils make this motor suitable for use with small, low-output transformer controllers, popular with European manufacturers. Suitable for use with most DCC accessory decoders designed for pulse operation.
Same motor as PL-10W, but with extended pin for under-board fixing. Requires 9.5mm (3/8in) hole. Specially wound coils make this motor suitable for use with small, low-output transformer controllers, popular with European manufacturers. Suitable for use with most DCC accessory decoders designed for pulse operation.
Base unit for use with the motor with the extended pin ref. PL-10E or PL-10WE. Full instructions and screws included. Pack of 5.
Can be used on both Setrack and Streamline in most gauges below O for both left and right hand turnouts. Usually needs a CDU. May not be suitable in certain turnout combinations due to lack of space.
Simple, inexpensive switch easily fitted underneath the PECO Turnout Motor PL-10 series to provide electrical switching for frog polarity, signals etc. Suitable only for OO/HO and larger scales. Rated 1.5 amps.
Provides the short burst of current needed to operate the PL9 or PL-10 series turnout motor.
Merkur Dark Grey Arches HO/OO Gauge (501011) £ 9.99
DCC Ring Main Cable (Red/Black Trace) £ 0.50
Merkur Sandstone Arches HO/OO Gauge Brown-Red (501012) £ 9.99
Merkur Rustic Grey Arches HO/OO Gauge (501014) £ 9.99
Baseboard Leg Adjusters £ 1.50
» All best sellers
» All new products
» All specials
Follow us