> Turnout Motors & Accessories

Turnout Motors & Accessories

Turnout or point motors make the remote operation of turnouts easy. Sherwood Models supply both solenoid and slow act...

Turnout or point motors make the remote operation of turnouts easy. Sherwood Models supply both solenoid and slow action motors/switch machines. For DCC operation an accessory decoder is required.

More

• Select to compare

  

  Gaugemaster SEEP PM1 Point Motor

  Seep Point Motors have the advantage of being easy to fix under the baseboard requiring only a small slot to operate the point. The PM-1 has a built in changeover switch to operate accessories or change frog polarity.

  £ 6.25
  Available

  Add to cart View

• Select to compare

  

  Gaugemaster SEEP PM4 Point Motor

  Seep Point Motors have the advantage of being easy to fix under the baseboard. requiring only a small slot to operate the point. The PM-4 is a self-latching point motor, ideal for use with hand-made points, and also includes a changeover switch for operating accessories or changing frog polarity.

  £ 7.25
  Available

  Add to cart View

• Select to compare

  

  PECO PL-10 Turnout Motor

  The most reliable, discrete and simple method is to clip one of these directly to the underside of a Peco turnout. Requires a rectangular hole 40mm x 24mm.

  £ 8.25
  Available

  Add to cart View

• Select to compare

  

  PECO PL-10E Turnout Motor...

  Designed for use with PL-9 mounting plate. Use this if you do not wish to cut a large hole in your baseboard. Drill a hole, 9.5mm (3/8in) through the baseboard beneath the centre of the tie bar.

  £ 8.25
  Available

  Add to cart View

• Select to compare

  

  PECO PL-10W Turnout Motor (Low...

  Specially wound coils make this motor suitable for use with small, low-output transformer controllers, popular with European manufacturers. Suitable for use with most DCC accessory decoders designed for pulse operation.

  £ 8.85
  Available

  Add to cart View

• Select to compare

  

  PECO PL-10WE Turnout Motor...

  Same motor as PL-10W, but with extended pin for under-board fixing. Requires 9.5mm (3/8in) hole. Specially wound coils make this motor suitable for use with small, low-output transformer controllers, popular with European manufacturers. Suitable for use with most DCC accessory decoders designed for pulse operation.

  £ 8.85
  Available

  Add to cart View

• Select to compare

  

  PECO PL-9 Mounting Plate

  Base unit for use with the motor with the extended pin ref. PL-10E or PL-10WE. Full instructions and screws included. Pack of 5.

  £ 3.50
  Available

  Add to cart View

• Select to compare

  

  PECO PL-11 Side Mounted Turnout...

  Can be used on both Setrack and Streamline in most gauges below O for both left and right hand turnouts. Usually needs a CDU. May not be suitable in certain turnout combinations due to lack of space.

  £ 10.25
  Available

  Add to cart View

• Select to compare

  

  PECO PL-13 Accessory Switch

  Simple, inexpensive switch easily fitted underneath the PECO Turnout Motor PL-10 series to provide electrical switching for frog polarity, signals etc. Suitable only for OO/HO and larger scales. Rated 1.5 amps.

  £ 4.10
  Available

  Add to cart View

• Select to compare

  

  DCC Concepts DCP-CB12DIP COBALT...

  DCC Concepts DCP-CB12DIP COBALT ip Slow Action Digital Point Motor Pack of 12.

  Reduced price!

  £ 269.95
  Out of stock

  Add to cart
  View